Found in 2008, We are professional industrial valves manufacturers on wellhead control.

24 hours at your service:

an introduction to pressure relief butterfly valves

by:Sino Valves     2021-02-21
Although there are several different types of valves that can be used to adjust the pressure at present, the pressure relief butterfly valve is a favorite of many people due to its effective design.
Pressure Relief butterfly valve is a flow control device used to adjust the flow of water or other liquid through the pipeline.
In this regard, it is very similar to the ball valve.
However, instead of using a ball as an anchor, it uses a disc inserted into the center of the pipe.
Insert the rod through the disc in order to connect it to the actuator located outside the pipe.
What really makes the butterfly control valve different from the ball type is that no matter where it is, the flow will produce a pressure drop.
The pressure relief butterfly valve is classified as a rotary valve with several different types to choose from.
Your best choice will depend on the level of stress you need and the application you are involved.
The most widely used styles include: flexible seat with flexible, rubber seat and working pressure of 23 psi.
The high performance SFP has a double eccentric design and a working pressure of 725psi.
Tricentric GmbH has a metal and working pressure of up to a month, and is available at PSI.
In addition, depending on the installation plan, the pressure relief butterfly valve is also different.
The most common design is wafer style.
These are fairly cheap, designed to prevent pressure seals in several directions, thus preventing reflux in systems designed for only one flow direction.
They use tight-fitting seals such as o-
Ring or gasket, and plane on both sides of the valve.
You have another option, that is, the convex butterfly control valve.
The threaded plug-ins that feature on both sides of the main body of the valve allow you to install them using two separate sets of bolts.
It is usually installed between two flanges so that either side of the system can be disconnected without any interference from the other side.
When this type is used for a dead end plumbing system, its pressure level is reduced.
The cast iron butterfly valve is also different in installation methods.
This can be a double offset (DOST)
Or Triple offset (TOST).
Pressure Relief butterfly valve can be used in a variety of different applications.
For example, firefighters use them on hoses, which can limit the pressure they generate.
They are also often used for front and rear suction entrances, pumps and water tanks.
In addition to simply acting as a regulator, cast iron butterfly valves can also be used to adjust the flow of water in the pipe, which can actually start and stop the flow of water as needed.
Butterfly control valves are one of the most well-known and popular designs and are very effective in an overly simple design.
Custom message
Chat Online
Chat Online
Chat Online inputting...